155+ Workbench With Lockable Drawers

www.homedepot.com

Introduction: Build Your Own Ultimate Workbench! Ready to upgrade your workshop with a sturdy, spacious, and secure workbench? This step-by-step guide will walk you through building a 155+ cm workbench featuring lockable drawers, perfect for tackling any DIY project while keeping your tools organized and safe. Get ready to roll up your sleeves and create a workbench that will last for years to come!

Step 1: Gather Your Materials & Tools Before you begin, ensure you have all the necessary materials and tools on hand. This will streamline the building process and minimize frustration. Here's a comprehensive list:

• Wood: Approximately 80-100 board feet of lumber. We recommend using framing lumber (2x4s) for the frame and higher-quality plywood or solid wood (like pine or maple) for the workbench top and drawer fronts. Consider the dimensions of your space and preferred workbench height when determining the exact lengths of lumber needed.
• Hardware: Wood screws (various lengths), construction adhesive, drawer slides (rated for appropriate weight), lockable drawer pulls, hinges (for optional storage cabinet), nails, sandpaper (various grits).
• Tools: Circular saw, miter saw (optional but helpful), drill, impact driver, measuring tape, pencil, square, level, clamps, safety glasses, hearing protection, countersink bit, wood filler (optional), paint or stain (optional).

Step 2: Construct the Workbench Frame The frame is the backbone of your workbench. Accuracy and sturdiness are paramount.

Cut the 2x4s to the desired length for the workbench legs. The standard workbench height is around 36 inches, but adjust this based on your personal preference. Cut four legs to equal length.

Cut 2x4s for the top frame. You'll need two pieces for the length and two for the width of the workbench. Remember that your workbench is 155+cm (approximately 61 inches) wide, so plan accordingly.

Cut 2x4s for the bottom frame. These will be the same dimensions as the top frame.

Assemble the top and bottom frames separately using wood screws and construction adhesive. Ensure the corners are square using a square tool.

Attach the legs to the inside corners of both the top and bottom frames, again using screws and adhesive. Ensure the legs are flush with the frame edges and perfectly vertical using a level.

Add horizontal supports between the legs for added stability. Cut 2x4s to fit between the legs on each side and attach them with screws and adhesive.

Add a center support beam along the length of the workbench, between the bottom frame pieces. This will help prevent sagging in the middle.

Step 3: Build the Workbench Top The workbench top is where you'll be doing most of your work, so choose your material wisely and ensure it's smooth and durable.

Cut the plywood or solid wood to the desired dimensions for the workbench top. Ensure it overhangs the frame slightly on all sides.

If using multiple pieces of plywood, join them together with wood glue and clamps. Allow the glue to dry completely before proceeding.

Attach the workbench top to the frame using screws. Countersink the screws to prevent them from protruding above the surface.

Sand the workbench top smooth using progressively finer grits of sandpaper.

Apply a finish to the workbench top to protect it from moisture and wear. You can use paint, stain, or a clear coat.

Step 4: Construct the Drawers The drawers provide essential storage for your tools and supplies.

Measure the inside dimensions of the drawer openings. These measurements will determine the size of your drawer boxes.

Cut the plywood or solid wood to the appropriate dimensions for the drawer sides, front, and back.

Assemble the drawer boxes using screws and construction adhesive. Ensure the corners are square.

Attach the drawer slides to the drawer boxes and the inside of the workbench frame. Follow the manufacturer's instructions for proper installation.

Cut the drawer fronts to the desired size and attach them to the drawer boxes.

Install the lockable drawer pulls on the drawer fronts.

Step 5: Add Finishing Touches (Optional) These optional touches will enhance the functionality and appearance of your workbench.

Add a back panel to the workbench to prevent tools from falling behind it.

Install a power strip on the workbench for easy access to electricity.

Add a vise to the workbench for holding workpieces securely.

Build a storage cabinet underneath the workbench for additional storage space.

Paint or stain the entire workbench to match your workshop decor.

Conclusion: Your Custom Workbench is Complete! Congratulations! You've successfully built your own custom workbench with lockable drawers. This workbench will provide you with a sturdy and organized workspace for all your future DIY projects. Enjoy the satisfaction of knowing you built something yourself that will last for years to come. Remember to always prioritize safety when working with power tools and wood.

Husky 4 Ft. Solid Wood Top Workbench With Storage-g4801s-us

www.homedepot.com

"bentism 48x24"" Workbench With Power Outlets, 1500w, 220lbs Load, Heavy-duty Steel"

www.walmart.com

Pinnacle 900 X 1800 X 600mm Matte Black Xl Timber Top Workbench

www.bunnings.co.nz