133+ Woodworking Tutorial Videos

www.linkedin.com

Introduction: Building a Simple Wooden Birdhouse Want to attract feathered friends to your backyard? Building a simple wooden birdhouse is a rewarding DIY project that's both fun and beneficial for local wildlife. This guide provides a step-by-step process for creating a charming and functional birdhouse.

Materials and Tools You'll Need Gather the following supplies before you begin:

Untreated wood (pine or cedar recommended): approximately 1 board foot

Wood glue

Nails or screws (exterior grade)

Saw (hand saw, circular saw, or jigsaw)

Drill with drill bits

Measuring tape

Pencil

Sandpaper

Safety glasses

Dust mask

Optional: Paint or wood stain (bird-safe, non-toxic)

Step 1: Cut the Wood Pieces Using the dimensions below (or adjusting to your preference), carefully measure and cut the wood pieces. Ensure accurate cuts for a snug fit.

Front: 6" wide x 8" tall

Back: 6" wide x 10" tall

Sides (x2): 6" wide x 7" tall (angled cut: one side 7", other 9")

Bottom: 6" wide x 6" deep

Roof (x2): 7" wide x 8" deep

Step 2: Drill the Entrance Hole On the front piece, measure and drill an entrance hole. The size of the hole will determine the types of birds that can use the birdhouse.

1 1/2" diameter for larger birds like bluebirds

1 1/4" diameter for smaller birds like wrens and chickadees

Position the hole about 2" to 3" down from the top. Sand the edges of the hole to prevent injury to birds.

Step 3: Assemble the Birdhouse Body Begin assembling the sides, front, back, and bottom pieces. Apply wood glue to the edges where the pieces meet and then secure them with nails or screws.

Attach the bottom to the front and back pieces.

Attach the side pieces, ensuring the angled cuts are positioned correctly to create a slanted roof.

Allow the glue to dry completely according to the manufacturer's instructions.

Step 4: Attach the Roof Attach the two roof pieces to the top of the assembled body, overlapping them slightly in the center. Use wood glue and nails or screws to secure them firmly. Ensure the roof overhangs slightly on all sides to provide protection from rain.

Step 5: Sand and Finish Sand all surfaces of the birdhouse to remove any rough edges or splinters. If desired, paint or stain the birdhouse with a bird-safe, non-toxic finish. Allow the finish to dry completely before placing the birdhouse outside.

Step 6: Mounting the Birdhouse Decide on a suitable location for your birdhouse. Choose a spot that is protected from strong winds and direct sunlight. Mount the birdhouse securely to a tree, post, or building using screws or brackets. Consider the height preference of the birds you are trying to attract.

Conclusion: Enjoy Your New Birdhouse Congratulations! You've successfully built a simple wooden birdhouse. Now, sit back and enjoy watching the birds move in and make it their home. Remember to clean the birdhouse annually after nesting season to keep it healthy and safe for future inhabitants.

Woodworking Tutorial-beginners Tips And Guide By Feng Liu

appadvice.com

Woodworking Tutorial Videos

www.linkedin.com

Youtube Diy Woodworking

woodworkingarthome.blogspot.com